Model 8900E Insulated Saddle for Cold or Hot Service

Description: 

The Buckaroos Model 8900E insulated saddle is designed primarily for indoor use on cold and hot service. It can be used outdoors if weather protected. Meets MSS SP-58, 9.2.2 for Type 40 Shields.

Features / Benefits:

• A complete composite assembly, for Fast and Easy Installation.
• Meets ASTM E-84 25-50 Flame Spread requirements for design considerations.
• A 360-degree section of 8 p.c.f. density cellular glass pipe insulation for Thermal Efficiency.
• An All Service Jacket vapor retarder for Condensation Control.
• A G-90 galvanized steel Buckaroo 180-degree bottom shield (a 360-degree self-clamping shield also available) for Maximum Insulation Protection at hanger locations.
• 100 PSI compressive strength insulation for maximum span load capability.

The Model 8900E (Extended Insulation) has the insulation extended beyond the saddle for easy application of a tape butt-strip. Always install the specified insulation thickness to insure system performance.

8900E (Extended) Insulated Saddle
Saves Energy! Saves Labor! Saves Money! 

Intended Application:

For use on refrigeration lines, chilled water lines, cold-process piping and thermal-cyclic systems. Use on cold systems where control of condensation is a critical requirement. Recommended for use on hot systems up to 500 degrees F to standardize saddle specification. Ideal for domestic hot water and low-pressure (50# max. pressure) steam lines. The Model 8900E insulated saddle saves energy. Insure complete system integrity by eliminating compromised thermal performance at all hanger and support locations. Due to its complete design, the Model 8900E insulated saddle saves labor because it can be installed rapidly by any qualified contractor. The Model 8900E insulated saddle is always a wise investment!