Model 4300P Insulated Saddle for Cold or Hot Service

Description: 

The Buckaroos Model 4300P insulated saddle is designed primarily for indoor use on 6” IPS and larger in cold and hot service. It can be used outdoors if weather protected. Meets MSS SP-58, 9.2.2 for Type 40 Shields.

Features / Benefits:

• A complete composite assembly, for Fast and Easy Installation.
• A 360-degree section of polyisocyanurate pipe insulation for greater Thermal Efficiency and compressive strength. With a 4.0 PCF bottom support-section and a 3.0 PCF top section.
• A 6 mil thickness, .01 perm rated industrial grade vapor retarder film for Superior Condensation Control.
• A G-90 galvanized steel Buckaroo 180-degree bottom shield (a 360-degree self-clamping shield also available) for Maximum Insulation Protection at hanger locations.
• A Heavy-Duty structural steel plate to Reduce Point Loading in Roller and Trapeze Hangers.
• A lock-joint to Reduce Heat Gain/Loss along the longitudinal seams to Save Energy.*

The Model 4300P (Plated) has the additional structural support of a ¼” thick steel plate welded to the saddle for maximum spans in Roller Hanger applications. Always install the specified insulation thickness to insure system performance.

Intended Application:

For indoor use on 6 inch IPS and larger in Roller or Trapeze hangers. Use on refrigeration lines, chilled water lines, cold-process piping and thermal-cyclic systems where control of condensation is a critical requirement. Use on hot systems up to 300 degrees F on domestic hot water and low-pressure (50# max. pressure) steam lines. The Model 4300P insulated saddle saves energy. Insure complete system integrity by eliminating compromised thermal performance at all hanger and support locations. Due to its complete design, the Model 4300P insulated saddle saves labor because it can be installed rapidly by any qualified contractor. The Model 4300P insulated saddle is always a wise investment!