58 Series Support Saddle
Description:
The Buckaroos 58 Series saddle is designed to provide proper support to insulated pipe at Clevis Hanger locations. Precision-formed from G-90 galvanized steel rolled into a 180-degree arc, this Galvanized saddle contains unique features that set it apart from similar looking, but lesser performing saddles. The 58 Series Saddle is a proven winner!
Features and Benefits:
- Constructed of G-90 Galvanized Steel per ASTM A 527 for long-term durability.
- Precise manufacturing tolerances yield exact Insulated Outer Diameter per ASTM C 585 Standard Specification for perfect fit.
- Available in 18 gauge through 12 gauge thickness for virtually every application.
- Each saddle is individually marked with the insulation outer diameter for easy jobsite identification.
- Also available as a 2-piece upper/lower unit for complete self-clamping 360-degree insulation protection.
- High-strength Corrugated Kraft packaging with ten saddles per carton for maximum convenience and easy handling.
Technical Data:
Constructed of G-90 Galvanized steel per ASTM A 527.
Formed to fit exact insulated outer diameters per ASTM C 585.
Product Dimensions Available:
Buckaroo 58 Series Support Saddles are ordered to conform to the sizing requirements of MSS SP-58 shown below.
Standard Product Dimensions per MSS
SP-58:
|
Pipe Size
|
Saddle Gauge
|
Saddle Length
|
|
½” – 3 ½”
|
18
|
12”
|
|
4”
|
16
|
12”
|
|
5” and 6”
|
16
|
18”
|
|
8” – 14”
|
14
|
24”
|
|
16” – 24”
|
12
|
24”
|
|
The
above table is based upon insulation compressive strength of 15 p.s.i.
in clevis hangers. Higher compressive strength insulations can result in
shorter saddle lengths. Consult your project specification.
|
Ordering notes:
-
Always refer to your project specification for saddle length and gauge requirements.
-
Individual project requirements may vary considerably from the above chart.
-
Because of the variations in project specifications, Buckaroos can provide virtually any saddle length and gauge combination upon request.
-
Verify insulation
O.D. and hanger size for correct fit. Please consult the Saddle Size Selection Table on page 32.
|